Atx Netzteil Belegung Pdf
. The color code for the wires is: Red = +5V, Black = 0V, Yellow = +12V, Blue = -12V, Brown = Sense (tie to 3.3V), Orange = +3.3V, Purple = +5V Standby (not used), Gray = power is on, and Green = Turn DC on. Drill holes in a free area of the power supply case by marking the center of the holes with a nail and a tap from the hammer.
Atx Netzteil
Use a dremel to drill the starting holes followed by a hand reamer to enlarge the holes till they are the right size by test fitting the binding posts. Also drill holes for the power ON LED and a Power switch. Vorsicht, hier gibt es falsche Beschriftungen!. Connect all the pieces together. Connect one of the red wires to the power resistor, all the remaining red wires to the red binding posts;. connect one of the black wires to the other end of the power resistor, one black wire to a resistor (330 ohm) attached anode of the LED, one black wire to the DC-On switch, all the remaining black wires to the black binding post;.
Atx Netzteil Belegung Pdf Free
connect the white to the -5V binding post, yellow to the +12V binding post, the blue to the -12V binding post, the gray to the cathode of the LED. Make sure that all the connections look good. Put a drop of superglue to stick the LED to its hole. Put the cover on. Plug in the IEC power cord into the back and into an AC socket.
Switch on the main switch on the PSU. Check to see if the LED light comes on. If it has not, then power up by flipping the switch that you had placed on the front. Plug in a 12V bulb into the different sockets to see if the PSU worked, also check with a digital voltmeter. It should look good and work like a charm!